HP BladeSystem bc2000 - Blade PC, Reference Manual

Page: 81 / 434

HP PC Blade Switch CLI Reference Guide www.hp.com 5-13
Address Table Commands
port security routed secure-address
The port security routed secure-address Interface Configuration (Ethernet, port-channel) mode
command adds a MAC-layer secure address to a routed port. Use the no form of this command to
delete a MAC address.
Syntax
port security routed secure-address mac-address
no port security routed secure-address mac-address
Parameters
n
mac-address — A valid MAC address.
Default Setting
No addresses are defined.
Command Mode
Interface Configuration (Ethernet, port-channel) mode. Cannot be configured for a range of
interfaces (range context).
Command Usage
The command enables adding secure MAC addresses to a routed port in port security mode. The
command is available when the port is a routed port and in port security mode. The address is
deleted if the port exits the security mode or is not a routed port.
Use this command on interfaces that have an IP address configured, instead of the command
bridge address mac-address { ethernet interface port-channel port-channel-number }
[ secure ]
.
Example
The following command adds the MAC-layer address 66:66:66:66:66:66 to port e1.
Console(config)# interface ethernet e1
Console(config-if)# port security routed secure-address 66:66:66:66:66:66