HP BladeSystem bc2000 - Blade PC Reference Manual Download Page 287

Page: 287 / 434

HP PC Blade Switch CLI Reference Guide

www.hp.com

21-15

SNMP Commands

snmp-server contact

The

snmp-server contact

Global Configuration mode command configures the system contact

(sysContact) string. To remove system contact information, use the

form of the command.

Syntax

snmp-server contact

text

no snmp-server contact

Parameters

text

— Specifies the string that describes system contact information.

(Range: 0-160 characters)

Default Setting

This command has no default configuration.

Command Mode

Global Configuration mode

Command Usage

Do not include spaces in the text string or place text that includes spaces inside quotation marks.

Example

The following command configures the system contact point called

HP_Technical_Support

Console(config)#

snmp-server contact

HP_Technical_Support

Summary of Contents for BladeSystem bc2000 - Blade PC



















































































































































































































































































































































































































































Search results

Summary of Contents for BladeSystem bc2000 - Blade PC

Reviews:

HP BladeSystem bc2000 - Blade PC, Reference Manual, Page: 287 / 434

Search results

Summary of Contents for BladeSystem bc2000 - Blade PC

Reviews: