Setup and Installation Guide
www.hp.com
A-1
A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and
identification, your product has been assigned a unique series
number. The series number can be found on the product nameplate
label, along with all required approval markings and information.
When requesting compliance information for this product, always
refer to this series number. The series number should not be confused
with the marketing name or model number of the product.
Federal Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules
and Regulations has established Radio Frequency (RF) emission
limits to provide an interference-free radio frequency spectrum. Many
electronic devices, including computers, generate RF energy
incidental to their intended function and are, therefore, covered by
these rules. These rules place computers and related peripheral
devices into two classes, A and B, depending upon their intended
installation. Class A devices are those that may reasonably be
expected to be installed in a business or commercial environment.
Class B devices are those that may reasonably be expected to be
installed in a residential environment (for example, personal
computers). The FCC requires devices in both classes to bear a label
indicating the interference potential of the device as well as additional
operating instructions for the user.
The rating label on the device shows the classification (A or B) of the
equipment. Class B devices have an FCC logo or FCC ID on the
label. Class A devices do not have an FCC logo or FCC ID on the
label. After the Class of the device is determined, refer to the
corresponding statement in the following sections.