4-22
www.hp.com
Setup and Installation Guide
Installing and Cabling the HP CCI Solution
Installing Additional Memory
The Blade PCs support the following memory features:
■
Unregistered SODIMM DDR 333 memory
For more information, refer to
QuickSpecs
located on the HP
website:
www.hp.com
■
512MB system memory expandable to 2GB
■
Two SODIMM slots
To install SODIMMs on a Blade PC:
1. Power down the Blade PC. See the
“Powering Down a Blade PC”
section in this chapter.
2. Remove the Blade PC from the enclosure. See the
“Removing a
Blade PC”
section in this chapter.
3. Place the Blade PC on a level, nonconductive surface.
4. Locate the SODIMM socket keys on the Blade PC:
❏
SODIMM socket 1 keys
1
❏
SODIMM socket 2 keys
2
IMPORTANT:
SODIMMs are installed inverted from one another. If the
labels on SODIMM 1 are face-up, the labels on SODIMM 2 are probably
face-down.
SODIMM socket keys
