manualshive.com logo in svg

HP Bc1500 - BladeSystem - Blade PC, Setup And Installation Manual, Page: 67 / 149

Share
Download
HP Bc1500 - BladeSystem - Blade PC Setup And Installation Manual Download Page 67

Setup and Installation Guide

www.hp.com

5-11

Deployment and Management

Security

Setup Password

Allows you to set and enable setup 
(administrator) password.

✎

If the setup password is set, it is required 
to change Computer Setup options, flash 
the ROM, and make changes to certain 
plug and play settings under Windows.

Device Security

Device Available/Device Hidden

• All USB ports

Network Service Boot

Enables/disables the computer’s ability to 
boot from an operating system installed on 
a network server.

System IDs

Allows you to enter:

• Asset Tag (18-byte identifier) and 

ownership Tag (80-byte identifier 
displayed during POST).

• Ownership  Tag
• Operating  System
• System Name
• UUID
• Keyboard locale setting (for example, 

U.S. or Deutsche) for System ID entry.

Computer Setup (F10) Utility 

(Continued)

Heading

Option

Description

✎

Support for specific Computer Setup options may vary depending on the hardware 
configuration.

Summary of Contents for Bc1500 - BladeSystem - Blade PC






















































































































































Reviews:

No comments