manualshive.com logo in svg

HP Bc1500 - BladeSystem - Blade PC, Setup And Installation Manual, Page: 76 / 149

Share
Download
HP Bc1500 - BladeSystem - Blade PC Setup And Installation Manual Download Page 76

5-20

www.hp.com

Setup and Installation Guide

Deployment and Management

For more information, including instructions on flashing the 
Integrated Administrator ROM, refer to the 

HP PC Blade Enclosure 

Integrated Administrator User Guide

 on the Documentation CD that 

ships with your enclosure.

Blade PC Event Messages

The event list displays the affected components and the associated 
error messages. 

The following table identifies the event types (affected components) 
and associated event messages.

Blade PC Event Messages 

Event Type

Event Message

Blade PC Environment

Overheat condition*

System Overheating (Zone X)

Operating System

Automatic operating system 
shutdown

Automatic Operating System Shutdown Initiated Due to Fan 
Failure
Automatic Operating System Shutdown Initiated Due to 
Overheat Condition

Enclosure Environment

Overheat Condition

The Integrated Administrator has issued an alert that its health 
state has changed **

Fan Failure

The Integrated Administrator has issued an alert that its health 
state has changed **

✎

*For specific operating temperature ranges, see 

Appendix F, “Specifications.”

 

 

**Refer to the Integrated Administrator log for detailed messages.

Summary of Contents for Bc1500 - BladeSystem - Blade PC






















































































































































Reviews:

No comments