Installing the SAN Switch 2/16
26
SAN Switch 2/16 Version 3.1.x Installation Guide
* Depending on time of purchase, the Fixed Rack Mount Kit items listed in
Table 3
may
not represent the rail kit that shipped with your switch.
Table 3: Shipping Carton Contents
Item
Number
Description
1
One HP StorageWorks SAN Switch
2/16 product accessory bag containing
CD, license, documentation
2
Two standard AC power cords and two
PDU cords
3
One RS-232 Serial cable (convertible
to an RJ-45 connector, by removing
the adapter on the end of the cable)
4
HP StorageWorks SAN Switch 2/16
5
*Rack Mount Kit containing:
Slide Assembly, includes one Inner and
one Outer Slide Rail, with the following
items preinstalled:
• L-Bracket, Slide Mount, 3-hole (4)
• Power Cord Clips (6)
6
Pouch containing Rack Mount hardware:
• 3-hole Bar Nuts (4)
• 10-32 x 3/8-inch Phillips pan-head
screws (10)
• 8-32 x 3/16-inch Phillips pan-head
screws (10)
• Square alignment washers (8)
• Right and left rear rack mount
brackets (2); use if installing so that
port side slides from the rear
• Right and left front mount brackets
(2); use if installing so that power
supply end slides out from the front of
the rack
• Rubber mounting feet (4); use if
installing on a flat surface
