Backing Up the Configuration and Upgrading Firmware
87
SAN Switch 2/16 Version 3.1.x Installation Guide
Restoring the System Configuration Settings
Use these steps to restore the system configuration settings from a backup.
1. Verify that the RSHD service (on a UNIX machine) or the FTP service (on a
Windows or UNIX machine) is running on the host workstation.
2. Log into the switch as the admin user.
3. Shut down the switch by entering the following command:
switchDisable
4. At the command line, enter the following command:
configDownload "hostIPaddr", "user",
"path_filename","password"
For example,
hostIPaddr
is the IP address of the host computer,
user
is the
User ID used to log into this computer,
path_filename
is the path location and
filename of the system configuration file, and
password
is the password for
the user ID specified.
Note:
The password operand is only required if you are using FTP.
5. Reboot the switch by entering the following command:
fastBoot
