Installing the SAN Switch 2/16
50
SAN Switch 2/16 Version 3.1.x Installation Guide
Note:
This kit contains both left rails and right rails. The rails are marked with
Right
and
Left
to distinguish the rails from each other.
4. Assemble the outer rails by completing the following steps:
a.
Attach the left outer rail and the right outer rails to the rear mounting
brackets using (2) 1/4-20 hex nuts with captive star lock washers attached
loosely as shown in
Figure 16
. Don’t tighten them. The nuts will be
tightened later in
step 8
.
Figure 16: Installing the outer rails (HP 9000 Series or comparable EIA rack)
