HP A3724A - SureStore E Hub S10, User Manual

Page: 61 / 134

Enabling Hub Management
59
R
S
-2
3
2
In
te
rf
a
c
e
F
u
n
c
tio
n
s
The get community name must be the same name used when a device was added to
Fibre Channel Manager. If the names are not identical, Fibre Channel Manager cannot
report management information for this hub. The default value is
public
.
•
set community name
The set community name must be the same name used when a device was added to
Fibre Channel Manager. If the names are not identical, Fibre Channel Manager cannot
set management parameters for this hub. The default value is
private .
•
SNMP trap community name
The hub includes the trap community name in event messages sent to the management
application. The default value is
SNMP_trap .
•
trap server IP addresses
This option sets the destination addresses for SNMP event messages. A maximum of
four addresses can be specified.
Caution If you enter the name of an existing IP address, the existing address is deleted.
•
MIB-2 system name
This value is returned for the SNMP MIB-2 system . sysName variable.
•
default values
This option resets the get, set, and trap community names to the default values.
To verify and set SNMP values, do the following:
1. Verify with your network administrator that the default get community name is
acceptable. The default is
public
.
2. Verify with your network administrator that the default set community name is
acceptable. The default is private .
3. Verify with your network administrator that the default trap community name is
acceptable. The default is
SNMP_trap
.