manualshive.com logo in svg

HP 9000 V-Class, Operator'S Manual

Share
Download
HP 9000 V-Class Operator'S Manual Download Page 63

Chapter 4

49

Firmware (OBP and PDC)

Enabling Autoboot

Enabling Autoboot

AUto

 displays or sets the Autoboot or Search flag, which sets the way a

system will behave after powering on. If Autoboot is ON, the system
boots automatically after reset. If AutoSearch is ON and Autoboot is
OFF, the system searches for and displays all I/O devices that the system
can boot from. Changes to a flag take effect after a system reset or power-
on. The default value for both Autoboot and Autosearch is OFF.

Syntax

AUto

 [

BOot

 |

SEArch

] [

ON

 |

OFF

]

• Used alone, this command displays the current status of the Autoboot

and Autosearch flags.

•

BOot

 - If ON, the OS is automatically loaded from the primary boot

path after a power-up or reset. Otherwise, the system displays the
boot menu and waits for interactive boot commands. During an
autoboot, the process pauses for 10 seconds to allow the operator to
stop the boot process.

•

SEArch

 - If ON, the system searches for all I/O devices that it can

boot from and displays a list. Usually disabled because the search can
be time-consuming.

•

ON

enables the indicated feature.

•

OFF

disables the indicated feature.

Summary of Contents for 9000 V-Class





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands