manualshive.com logo in svg

HP 9000 V-Class, Operator'S Manual

Share
Download
HP 9000 V-Class Operator'S Manual Download Page 43

Chapter 3

29

Teststation

Teststation logons

Message window (test station console - message
output)

The message window (TOP LEFT) displays status messages about the V-
Class server. Do not enter commands in this window.

This window displays status from the

ccmd

 daemon running on the

teststation. The

ccmd

 daemon builds the node configuration file

/ssp/

data/nod_0.cfg

.

Hard error logger also displays status in this window.

Console window (sppconsole - complex console)

This is the main console window (TOP RIGHT) for the V-Class server.
All POST (Power-On Self-Test) status is displayed here. The user can
type commands while in HP mode (boot menu) to boot and configure the
node. See Chapter 4, “Firmware (OBP and PDC)” for more information
about HP mode (boot menu). HP service personnel can also enter a
special mode called forth mode (OBP) to perform special configuration
commands.

tcsh shell windows (tcsh)

The tsh windows (LOWER LEFT and LOWER RIGHT) are local shell
windows on the teststation. The user may enter commands into these
windows which invoke scripts or functions on the V-Class server.

Some commands like the

do_reset

 command are scripts that begin

execution on the teststation and then control the V-Class server.

Summary of Contents for 9000 V-Class





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands