manualshive.com logo in svg

HP 9000 V-Class, Operator'S Manual

Share
Download
HP 9000 V-Class Operator'S Manual Download Page 111

Chapter 7

97

Recovering from failures

Abnormal system shutdowns

Crash dump format conversion

If you are analyzing a crash dump on a computer running a different
version of HP-UX than the V-Class server, or if you are using a
debugging tool that does not recognize the specific format of the saved
file, you may not be able to analyze the crash dump in its current format.
Use

crashutil

 to convert the file format.

The basic format of the

crashutil

 command to do a conversion is:

/usr/sbin/crashutil -v

version source [destination]

version

Designates the version of the destination format.

source

Designates the pathname of the crash dump to be
converted.

destination

Designates the pathname where the converted file will
be written. If no destination is specified the source will
be overwritten.

See the crashutil(1M) manpage for more information.

Analyzing crash dumps

Analyzing crash dumps is not a trivial task. It requires intimate
knowledge of HP-UX internals and the use of debuggers. It is beyond the
scope of this document to cover the actual analysis process. If you need
help analyzing a crash dump, contact your Hewlett-Packard
representative.

Summary of Contents for 9000 V-Class





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands