manualshive.com logo in svg

HP 9000 V-Class, Operator'S Manual

Share
Download
HP 9000 V-Class Operator'S Manual Download Page 50

36

Chapter 3

Teststation

Using the console

Controlling the console remotely

You can perform system maintenance or diagnostics remotely by
assuming control of the console from a remote terminal. Upon gaining
control of the console, you have write access to that window.

Only one window can be active at a time.

To assume control of the console, complete the following steps:

Step 1. Remotely log in to the teststation as sppuser (default password: spp user)

with the following command:

rlogin

hostname

login:

sppuser

Password:

spp user

Step 2. Access the system console with the following command:

/spp/scripts/sppconsole

At this point you are in spy mode, meaning that you can only monitor
what is going on at the system console. If you try to enter a command the
following message is displayed:

[read-only -- use ‘^Ecf’ to attach, ‘^Ec?’ for help]

Step 3. Assume control of the console by attaching to it with the following

command:

CTRL-

Ecf

Step 4. You can relinquish control of the console and return to spy mode with the

following command:

CTRL-

Ecs

Step 5. Exit the session with the following command:

CTRL-

Ec.

Summary of Contents for 9000 V-Class





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands