manualshive.com logo in svg

HP 9000 V-Class, Operator'S Manual

Share
Download
HP 9000 V-Class Operator'S Manual Download Page 29

Chapter 2

15

Indicators, switches, and displays

Operator panel

Key switch panel

The key switch panel is located on the left of the operator panel, as
shown in Figure 3 on page 14. The key switch panel contains a two
position key switch, a DC ON LED, and a TOC (Transfer Of Control)
button, as shown in Figure 4.

 Figure 4

Key switch panel

Key switch

The key switch has four positions. Placing the key switch in any position
other than DC OFF powers up the V-Class server.

• DC OFF

DC power is not applied to the system. Placing the keyswitch in this
position is the normal method for turning off power to the system.

• ON

DC power is applied to the system. POST (Power On Self Test) begins
executing and brings up the system from an indeterminate state and
then calls OBP.

DC ON LED

This LED indicates that DC power has been applied to the system.

10/10/97

IOEXS095

DC OFF

DC ON 

TOC

ON

Summary of Contents for 9000 V-Class





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands