HP 8167A, User Manual, Page: 93 / 262

5
The value returned is applies
only to the attenuation mode (see
\[:SOURce]:POW er:A TT enuation:A UTO?").
If you specify MIN , DEF , or MAX with the query ,
it will return, respectively , the minimum,
default, or maximum amplitude level.
Example OUTPUT 724;":POW:ATT:AUTO OFF"
OUTPUT 724;":POW 200UW OUTPUT
724;":POW:ATT 22.32DB"
OUTPUT 724;":POW:ATT?" ENTER 724;A$
[:SOURce]:PO W er:A TT enuation:A UTO
Attenuator
Syntax [:SOURce ]:POWer:ATTenuation:AUTO <wsp>
OFF j ON j 0 j1
Description This command selects P ower or Attenuation
Mode . In P ower Mode , you specify the output
power . In Attenuation Mode , you must
specify both the laser output power , and the
attenuation level.
Use ON or 1 to select P ower Mode .
Use OFF or 0 to select Attenuation Mode
[:SOURce]:PO W er:A TT enuation:A UTO?
Attenuator
Syntax [:SOURce ]:POWer:ATTenuation:AUTO?
Description This query returns whether the instrument is in
P ower Mode , or Attenuation Mode .
1 indicates P ower Mode .
0 indicates Attenuation Mode
Remote Commands 5-23