HP 8167A, User Manual, Page: 156 / 262

C
HP 8167A HP 8168D HP 8168E HP 8168F
Tuning Speed (typ for a
1/10/100nm step)
6 7
200ms/300ms/2s
with #003
8
250ms/300ms/2s n/a 250ms/300ms/2s
Output P ower
9
-3dBm peak typ >-3dBm peak typ >+1dBm peak typ >+8dBm peak typ
>-4dBm (over full
wavelength range)
>-4dBm
(1500-1565nm)
>0dBm
(1500-1570nm)
>+7dBm
(1520-1570nm)
>-10dBm
(1490-1565nm)
>-10dBm
(1475-1575nm)
>1dBm
(1475-1575nm)
>-7dBm
(1450-1590nm)
for #023
8
reduce by 1dB n/a reduce by 1dB
for #003
8
reduce by 1.5dB n/a reduce by 1.5dB
for #007
8
reduce by 1dB reduce by 1dB reduce by 1dB
for #023 and #003
8
reduce by 2.5dB n/a reduce by 2.5dB
Minimum Output P ower -10dBm -7dBm
with #003
8
-50dBm n/a -50dBm -47dBm
P ower Linearity 60.1dB 60.1dB
10
with #003
8
60.3dB n/a 60.3dB 60.3dB
10
P ower Stability (over 1 hour) 60.03dB (typ 60.01dB)
P ower Repeatability (typ) 60.04dB 60.04dB
10
P ower Flatness 60.1dB 60.2dB 60.1dB 60.1dB
10
versus W avelength typ 60.1dB (1475-1575nm)
60.2dB
10
(1450-1590nm)
with #003
8
60.2dB n/a 60.2dB 60.2dB
10
(1475-1575nm)
60.3dB
10
(1450-1590nm)
6
Applicable for CW operation.
7
The Tuning Speed increases when Modulation is on.
8
Listed options are described in the Supplementary P erformance Characteristics
9
The Maximum power is lower when Modulation is on.
10
F or power settings below -3dBm (with option 003:P
REF
<-3dBm, independent of attenuator setting, or power
setting below -43dBm), the values shown may increase by up to 5 times .
C-6 Specications