HP 8114A Service Guide
Warning Messages
Due to hardware limits pulse parameter settings may be conflicting,
and lead to skipped, or distorted pulses output. The conflicts
are monitored by software, and the following warnings could be
displayed:
“Period too small may skip pulses”
“Width too small may skip pulses”
“Width too close to period”
“Delay too small may skip pulses”
“Delay too close to period”
“Double delay too small skip pulses?”
“Double pulses too close together”
“2nd double pulse may reach next period”
“Width
(Seconds)
“Width (Dutycycle) user-limit”
“High Level (V) close to absolute limit”
“Low Level (V) close to absolute limit”
“High Level (A) close to absolute limit”
“Low Level (A) close to absolute limit”
“Amplitude (V) close abs. high limit”
“Amplitude (V) close abs. low limit”
“Amplitude (A) close abs. high limit”
“Amplitude (A) close abs. low limit”
(V) too great for Width (Dtycycl)”
“Ampl. (A) too great for Width (Dtycycl)”
“Ampl. (V) too great for ext. width mode”
“Ampl. (A) too great for ext. width mode”
“High Level upper voltage user-limit”
“High Level upper current user-limit”
“Low Level lower voltage user-limit”
“Low Level lower current user-limit”
Troubleshooting 543
