HP 733/800/866MHz 1GHz, Administrator'S Manual

Page: 42 / 118

2 Installing Novell NetWare Drivers
NET.CFG Options for Novell NetWare
42 English
Options
The following chart lists the driver options defined by the DOS ODI software. The
options available for the PCnet driver (PCNTNW) and IPX protocol stack are shown
in a sample NET.CFG file. Protocol stacks other than IPX may have additional
options not listed here. Refer to the other protocol's documentation for more
information.
The PCnet driver has these NET.CFG options.
•
NODE ADDRESS
•
FRAME
•
PROTOCOL
•
FDUP
NOTE For the HP Ethernet Family Adapter, the DMA, INT, and PORT are not required for
the driver. In some cases, using these keywords would be a violation of the bus
specification. Otherwise, all other keywords may be used with the PCnet Family.
Refer to Chapter 6 “Driver Options - Software Keywords” for complete description of
these options.
Link Driver drivername
DMA [#1|#2] channel_number
INT [#1|#2] interrupt_request_number
MEM [#1|#2] hex_starting_address [hex_length]
PORT [#1|#2] hex_starting_address [hex_number_of]]
NODE ADDRESS hex_address
SLOT number
FRAME frame_type
PROTOCOL name hex_protocol_IDframe_type
SAPS number
LINK STATIONS number
ALTERNATE
MAX FRAM SIZE number
CONNECTOR DIX
Link Support
BUFFERS communication_number [size]
MEMPOOL number[k]
Protocol protocol name
BIND #board_number