HP 733/800/866MHz 1GHz, Administrator'S Manual

Page: 59 / 118

English 59
3 Installing Microsoft Network Drivers
NDIS 2.01, 3.1 and 4 Drivers for Windows 95 and Windows 95 OSR2
A new Select Network Adapter window is displayed.
8 Click on the
OK
button to install the
HP Ethernet Family Adapter with LAN
Remote Power
driver.
9 The selected driver now appears in the driver list and no specific configuration is
needed. Click on the
OK
button.
10 At this step, the system may prompt for installation disks. You can either insert
the appropriate installation diskette(s) or enter the full pathname of Windows 95
installation files preloaded by HP. This pathname is
C:\Windows\Options\Cabs\
11 Windows 95 will ask you to shut down to make the changes effective. Click
Yes
to
shut down and restart.
The installation for Windows 95 is now complete.
Installing the NDIS 2.01 and NDIS 4 Drivers for Windows 95 OSR2
Microsoft Windows 95 OSR2 supports both NDIS 2.01 and NDIS 4 drivers. The HP
Ethernet Family Adapter provides both NDIS drivers to run with Windows 95 OSR2.
CAUTION The NDIS 4 driver is supported on Windows 95 OSR2 only. If you have a previous
version of the Windows 95 operating system, you should install the NDIS 2.01 and/or
NDIS 3.1 driver. See
“NDIS 2.01, 3.1 and 4 Drivers for Windows 95 and Windows 95
OSR2” on page 57 for details.
To install the PCnet NDIS 2.01 and/or NDIS 4 drivers, follow the instructions given
below:
1 From the Settings menu, start the Control Panel.
2 To run the Network configuration utility, double click on the Network icon.
3 If a driver for the HP Ethernet Family adapter is already installed, select it and
then remove it by clicking on the
Remove
button.
4 Click on the
Add
button.
5 In the Select Network Component Type window, choose
Adapter
then click on
the
Add
button.