HP 733/800/866MHz 1GHz, Administrator'S Manual

Page: 49 / 118

English 49
3 Installing Microsoft Network Drivers
LAN Manager 2.x DOS and OS/2 Client Driver with NetBEUI Protocol
Installation Procedure
To install the PCnet Family NDIS Client or Server driver, follow the instructions
given below:
1 Insert the LAN Disk into the flexible disk drive.
2 From the LAN Manager subdirectory, run LAN Manager SETUP to begin
installation.
3 Use the ALT key on your keyboard and the highlighted letter(C) to pull down the
Configuration menu.
4 From the Network Adapter Drivers dialog box, select the HP Ethernet Family
Adapter from the menu, if shown. Otherwise, select Other Driver to import the HP
Ethernet Family Adapter driver from the LAN Disk.
5 Then, enter the disk drive letter for the LAN Disk.
6 Select the HP Ethernet Family Adapter and choose OK.
7 Select the desired protocol from the Network Protocol dialog box and choose OK.
8 In the Workstation Configuration dialog box, select the HP Ethernet Family
Adapter and choose OK.
9 Follow the remaining instructions from LAN Manager to complete the installation.
File Examples
During installation, LAN Manager will automatically make modifications to
CONFIG.SYS, AUTOEXEC.BAT, and PROTOCOL.INI files. Below is an example of
these files for the HP Ethernet Family Adapter.
CONFIG.SYS:
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\PCNTND\PCNTND.DOS
AUTOEXEC.BAT:
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
NET START WORKSTATION
LOAD NETBEUI
NET LOGON BEVERLY.SMITH