HP 7090A Operator'S Manual Download Page 18

Page: 18 / 105

Major Feature Locations

Front-Panel

Features

The following illustrations show the locations of the major features of the
HP

7090.

The illustrations are numerically keyed

the accompanying

descriptions.

---

1. Line Power Switch.

Pen Carousel

(removable): Holds up

six pens, which are accessible

to the pen holder.

Platen:

Provides a surface for the plotter paper.

Pinch Wheels and Drive Wheel:

Grip the paper during plotting. The

grit-covered drive wheel moves the paper hack and forth across the
platen.

5. Pen Holder:

Maneuvers the pens during plotting operations.

Paper Loading Lever:

Used to raise or lower the pinch wheels during

insertion or removal of paper.

7. Liquid-Crystal Display (LeD):

Displays measurement parameters

and other pertinent data.

Left and Right Front Panels:

Includes the controls,

indicators,

and

connectors

used during measurement/plotter operations.

9. Right Side Panel:

Includes the connectors used

establish auxiliary

connections.

trume

Description and General Operation

Summary of Contents for 7090A










































































































Search results

Summary of Contents for 7090A

Reviews:

HP 7090A, Operator'S Manual, Page: 18 / 105

Search results

Summary of Contents for 7090A

Reviews: