HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Maintenance And Service Manual Download

Page: 89 / 180

Remove the Phillips PM2.5×4.0 screw

(2)

that secures the heat sink to the system board.

Lift the right side of the heat sink

(1)

until it rests at angle.

NOTE:

Due to the adhesive quality of the thermal material located between the heat sink and

system board components, it may be necessary to move the heat sink from side to side to detach

it.

Release the heat sink

(2)

by sliding it to the right until it clears the left side of the top cover.

Component replacement procedures

Summary of Contents for 6930p - EliteBook - Core 2 Duo 2.8 GHz





















































































































































































Search results

Summary of Contents for 6930p - EliteBook - Core 2 Duo 2.8 GHz

Reviews:

Related manuals for 6930p - EliteBook - Core 2 Duo 2.8 GHz

Brands by name

Popular brands

HP 6930p - EliteBook - Core 2 Duo 2.8 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 6930p - EliteBook - Core 2 Duo 2.8 GHz

Reviews:

Related manuals for 6930p - EliteBook - Core 2 Duo 2.8 GHz

Brands by name

Popular brands