HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Maintenance And Service Manual Download Page 118

Page: 118 / 180

Select

To do this

NOTE:

Availability of the options above varies by computer model.

●

Enable/disable secondary battery fast charge (enabled by default).

●

Enable/disable HP QuickLook (enabled by default).

●

Enable/disable Virtualization Technology (select models only; enabled by default).

●

Enable/disable TXT (Intel® Trusted Execution Technology) (select models only;
enabled by default).

●

Enable/disable Dual Core CPU (select models only; enabled by default).

Built-In Device Options

●

Enable/disable the wireless button state (enabled by default).

●

Enable/disable embedded WWAN device radio (select models only; enabled by
default).

●

Enable/disable embedded Bluetooth® device radio (enabled by default).

●

Enable/disable the Network Interface Controller (LAN) (enabled by default).

●

Set the wake on LAN state. Options include the following:

◦

Disabled

◦

Boot to Network (set by default)

◦

Follow Boot Order

●

Enable/disable the fingerprint device (enabled by default).

●

Enable/disable a modem device (enabled by default).

Port Options (all are enabled by
default)

NOTE:

All port options are enabled by default.

●

Enable/disable the serial port.

●

Enable/disable the parallel port.

●

Enable/disable the flash media reader.

●

Enable/disable the USB port.

CAUTION:

Disabling the USB port also disables MultiBay devices and ExpressCard

devices on the advanced port replicator.

●

Enable/disable the 1394 port.

Set Security Level

Change, view, or hide security levels for all BIOS menu items.

Restore Security Defaults

Restore the default security settings.

108

Chapter 5 Computer Setup

Summary of Contents for 6930p - EliteBook - Core 2 Duo 2.8 GHz





















































































































































































Search results

Summary of Contents for 6930p - EliteBook - Core 2 Duo 2.8 GHz

Reviews:

Related manuals for 6930p - EliteBook - Core 2 Duo 2.8 GHz

Brands by name

Popular brands

HP 6930p - EliteBook - Core 2 Duo 2.8 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 6930p - EliteBook - Core 2 Duo 2.8 GHz

Reviews:

Related manuals for 6930p - EliteBook - Core 2 Duo 2.8 GHz

Brands by name

Popular brands