4.
Remove the battery (see
Battery on page 50
).
5.
Remove the following:
a.
Hard drive (see
Hard drive on page 56
)
b.
Keyboard (see
Keyboard on page 65
)
c.
Switch cover (see
Switch cover on page 74
)
d.
Display assembly (see
Display assembly on page 85
)
e.
Top cover (see
Top cover on page 90
)
Remove the modem module cable:
1.
Disconnect the modem module cable
(1)
from the system board.
2.
Remove the RJ-11 connector
(2)
from the clip built into the base enclosure.
Reverse this procedure to install the modem module cable.
Component replacement procedures
99
