HP 6400/8400, User Manual

Page: 76 / 150

How to Correct Meaning Status Code Value
Retrieve a valid firmware image
file and retry the request. The firmware image file has a header
checksum error.
65
Bad image header
Retrieve a valid firmware image
file and retry the request. The firmware image file has a checksum
error.
66
Bad image
Retrieve a valid firmware image
file and retry the request. Invalid status for logical disk. This error
is no longer supported.
67 The firmware image file is
too large.
Image too large
Retrieve a valid firmware image
file and retry the request The firmware image file is incompatible
with the current firmware.
70
Image incompatible with
system configuration. Version
conflict in upgrade or
downgrade not allowed.
Verify that the firmware image is
not corrupted and retry the firm-
ware download process. The firmware image download process
has failed because of a corrupted image
segment.
71
Bad image segment
No action required.
The firmware version already exists on
the device.
72
Image already loaded
Verify that the firmware image is
not corrupted and retry the firm-
ware download process. The firmware image download process
has failed because of a failed write op-
eration.
73
Image Write Error
Case 1: No action required.
Case 2: No action required.
Case 3: If a snapclone operation
is in progress, wait until the
snapclone operation has
completed and retry the operation.
Otherwise, the operation cannot
be performed on this virtual disk.
Case 4: No action required.
Case 5: No action required.
Case 1: The operation cannot be per-
formed because the virtual disk or snap-
shot is part of a snapshot group.
Case 2: The operation may be prevented
because a snapclone or snapshot
operation is in progress. If a snapclone
operation is in progress, the parent
virtual disk should be discarded
automatically after the operation
completes. If the parent virtual disk has
snapshots, then you must delete the
snapshots before the parent virtual disk
can be deleted.
Case 3: The operation cannot be
performed because either the previous
snapclone operation is still in progress,
or the virtual disk is already part of a
snapshot group.
Case 4: A capacity change is not
allowed on a virtual disk or snapshot that
is a part of a snapshot group.
Case 5: The operation cannot be
performed because the virtual disk or
snapshot is a part of a snapshot group.
74
Logical Disk Sharing
Retrieve a valid firmware image
file and retry the request. The firmware image file is not the correct
size.
75
Bad Image Size
Error messages 76