HP 6400/8400, User Manual

Page: 37 / 150

2 Enterprise Virtual Array startup
This chapter describes the procedures to install and configure the Enterprise Virtual Array. When
these procedures are complete, you can begin using your storage system.
NOTE:
Installation of the Enterprise Virtual Array should be done only by an HP authorized service
representative. The information in this chapter provides an overview of the steps involved in the
installation and configuration of the storage system.
EVA8400 storage system connections
Figure 22 shows how the storage system is connected to other components of the storage solution.
• The HSV450 controllers connect via four host ports (FP1, FP2, FP3, and FP4) to the Fibre Channel
fabrics. The hosts that will access the storage system are connected to the same fabrics.
• The HP Command View EVA management server also connects to the fabric.
• The controllers connect through two loop pairs to the drive enclosures. Each loop pair consists of
two independent loops, each capable of managing all the disks should one loop fail.
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide 37