4.
Press
to display
Clear Password
.
5.
Press
Enter
to clear the password.
The
Password cleared
message will be displayed.
The password is cleared. The system automatically returns to the default display (WWID).
Disabling password access in HP Command View EVA
Estimated time to complete:
10 minutes
To disable password access to a storage system in HP Command View EVA:
NOTE:
You will need to know the World Wide Name (WWN) of the storage system to disable password
access.
1.
Start HP Command View EVA in your browser.
2.
Click
Server Options
in the Session pane.
The Management Server Options window opens.
3.
Click
Storage system password access
.
The Storage System Password Access window opens.
4.
Click
Disable
.
The Disable Password Access to Storage System window opens.
5.
Select the storage system World Wide Node Name from the drop-down list.
NOTE:
Make sure you select the storage system from which you cleared passwords using the OCP
on the controller.
6.
Click
Disable Password
.
A confirmation box opens.
7.
Click
Yes
to disable the password.
Step 4. Halting all host access to the storage system for an
offline upgrade (optional)
IMPORTANT:
For information about upgrade paths, see Table 3.1, Upgrade support for controller software versions,
in the
HP StorageWorks Enterprise Virtual Array Compatibility Reference.
Estimated time to complete:
Varies. Must be performed for each host accessing the storage system.
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software Guide (XCS
6.220)
49
Summary of Contents for 6100
Page 8: ...8 ...
Page 44: ...Pre upgrade tasks 44 ...
Page 64: ...Upgrading the Enterprise Virtual Array 64 ...
Page 66: ...Downgrading the Enterprise Virtual Array 66 ...