5.
Select
Customer Details
and enter the following information:
a.
Enter your name in
Name
. This information is required.
b.
Enter your e-mail address in
to receive the completed report. This information is
required. It is not necessary to have an e-mail address connected to the EVA controller. You
should enter the e-mail address where you typically receive e-mail. You can enter multiple
email addresses in
by separating entries with a semicolon (;).
c.
Enter data in the remaining boxes as appropriate. This information is included in the reports,
but is not required.
d.
To send your raw data to HP automatically when creating a report, select
Automatically
e-mail the collected raw data on completion
.
e.
Click
Next
to save and proceed.
NOTE:
For information on using
Advanced Settings
, see the SAN Visibility user guide.
Creating a report
Once you have configured SAN Visibility for data collection, you can create a report. There are two
methods for creating a report:
•
Automatically—Automatically e-mails the data to HP when collection is complete. This requires
you to know the SMTP address of your mail server. If you have external e-mail access from your
environment, this is the preferred method.
•
Manually—Requires you to manually send the data to HP. If you do not have external e-mail access,
use this method.
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software Guide (XCS
6.220)
21
Summary of Contents for 6100
Page 8: ...8 ...
Page 44: ...Pre upgrade tasks 44 ...
Page 64: ...Upgrading the Enterprise Virtual Array 64 ...
Page 66: ...Downgrading the Enterprise Virtual Array 66 ...
