Creating a report automatically
1.
Click
Data Collection
.
2.
Select the fabric for which you want to create a report from the
Choose switch group for data
collection
. Check
Collect data for all switch groups
to create reports for all the fabrics.
3.
Clear
Capture Performance data for this switch
. If you want to gather switch performance data,
leave this option selected. Selecting this option will increase the amount of time required to collect
the switch data.
4.
Select
Mask IP Address
check box if you do not want to send the IP address information (in the
raw report) outside your network.
5.
Select a format for the report by selecting
HTML Report
,
Microsoft Excel Report
, or both.
6.
In the Data Collection sub-box, click
Start
. A message is displayed in the message area on
successful completion of data collection. If you have selected the option to collect switch
performance data, it will take at least 10 minutes to collect the data.
When data collection is complete, the raw data is sent to HP. The report is processed and the
formatted report returned to you within one business day.
7.
When you receive the formatted report, save it to a temporary location on the management
server.
Creating a report manually
The SMTP server IP address of the primary switch on the SAN is obtained by the e-mail address you
entered on the Customer Details page. If SAN Visibility does not find the SMTP server or if you want
to create a report manually, follow the procedure below:
1.
Click
Data Collection
.
2.
Select the fabric for which you want to create a report from
Choose switch group for data
collection
. Check
Collect data for all switch groups
to create reports for all the fabrics.
Pre-upgrade tasks
22
Summary of Contents for 6100
Page 8: ...8 ...
Page 44: ...Pre upgrade tasks 44 ...
Page 64: ...Upgrading the Enterprise Virtual Array 64 ...
Page 66: ...Downgrading the Enterprise Virtual Array 66 ...