3.
Select
SAN Settings
and enter the following information:
a.
Enter a name in
SAN Name
. You can use the default SAN Name, but HP recommends that
you change it to a name that is meaningful to you. This name is used when generating
reports, so it should be one that is easily recognized as being associated with the SAN on
which data collection will be done.
b.
Click
Rename
.
c.
Click
Yes
to confirm the name change.
d.
Select the fabric in the tree view.
e.
Enter a name in
Switch Group Name
. You can use the default fabric name, but HP
recommends that you change it to a name that is meaningful to you. This name is used when
generating reports, so it should be one that is easily recognized as being associated with
the fabric on which data collection will be done.
f.
Click
Rename
.
g.
Click
Yes
to confirm the name change.
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software Guide (XCS
6.220)
19
Summary of Contents for 6100
Page 8: ...8 ...
Page 44: ...Pre upgrade tasks 44 ...
Page 64: ...Upgrading the Enterprise Virtual Array 64 ...
Page 66: ...Downgrading the Enterprise Virtual Array 66 ...