HP 5400R zl2 Series, Nstallation And Getting Started Manual

Page: 35 / 140

1-25
Introducing the HP 5400R zl2 Switches
Switch Features
Introducing the HP 5400R zl2
Sw
itc
hes
• Routing Information Protocol (RIP) - provides RIPv1 and RIPv2
routing
• OSPF - provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing
• Policy-based routing - uses a classifier to select traffic that can be
forwarded based on policy set by the network administrator.
• Border Gateway Protocol (BGP) - provides IPv4 Border Gateway
Protocol routing, which is scalable, robust, and flexible
■ Support for many other advanced features to enhance network perfor-
mance, security, and control - for a description, see the
Management and
Configuration Guide which is on the HP networking Web site.
■ Support for IEEE 802.3af standard, IEEE 802.3at standard, and
pre-standard PoE devices.
■ Supports dual management module capability.
■ Supports 100% POE+ capacity at low line
■ Supports existing v2 zl and v3 zl2 modules
■ Support for three new Power Supplies
• BPSU (Base Power Supply unit - J9828A): Lower cost alternative
• LPSU (Low Power Supply unit - J9829A)
–
Dual-output 12V and 54V, with one C16 power receptacle
– For support of mid-range POE/POE+ installations
• HPSU (High Power Supply Unit - J9830A)
–
Dual-output 12V and 54V, with two C20 power receptacle
– For support of maximum POE/POE+ installations
■ Support for Trusted Platform Module (TPM) subsystem for storing certif-
icates and secure identity