HP 400338-001 - KVM Switch, Owner'S Manual

Page: 25 / 213

www.hp.com/racksolutions
19
Games
Hewlett Packard Console Switch
Administrator Command Menu
Add Port
Edit Port
Delete Port
Administrative Functions
Scanning
is OFF
Reset Standard Mse/Kbd
Reset Wheel Mse/Kbd
Version Information
ENTER = activate
ESC = exit
Once you have activated the main OSD Window, you can open the Command
Menu by pressing either of the
Ctrl keys twice.
The Command Menu options are selected in the same manner as ports in the
OSD Window. Scroll the Highlight Bar up and down and press
Enter when
your selection is highlighted.
The Command
Menu
THE COMMAND MENU
On-Screen Display Operations
If you are operating in non-secure mode or are the system administrator, you’ll
have several options that are not in the User level Command Menu. Add Port, Edit
Port, Delete Port and Administrator Functions are covered in separate sections in
this chapter. Scanning is covered in Chapter 6.
If you experience a loss of mouse signal while using the Rackmount Console
Switch, select the ‘Reset Standard Mouse/Keyboard’ option from this menu for
a server with a standard mouse driver or ‘Reset Wheel Mouse/Keyboard’ if you are
using a server with a Microsoft IntelliMouse or other wheel mouse driver. This will
reset and in most cases restore your mouse signal. These commands are equivalent
to the
<CM> MR <Enter> and <CM> MW <Enter> keyboard commands listed in
the ‘System Control & Maintenance’ section of this manual.
Choose the option ‘Version Information’ to display on your monitor the current
version level of your Rackmount Console Switch fi rmware. Press the
Esc
key to
clear this information from your screen.