19. Type the external NTP system address (if available) and press
ENTER
. If unavailable, type
none
and press
ENTER
.
SP Network Parameters
Enter Control-C at any time to abort this process
Enter the IP address of an external NTP system
<NTP.system.address>
20. Press
ENTER
or type
yes
and press
ENTER
to verify the network information you have supplied.
Screen content varies according to the setup options you have chosen.
SP Network Parameters
Enter Control-C at any time to abort this process
The Host Name is: <spname>
The IP address entered is: <static.IP.address>
The Netmask entered is: <subnet.mask.address>
The default gateway is: <default.gateway.address>
NTP system address: <NTP.system.address>
Data Transfer media: ETHERNET
Remote Operations media: MODEM
Connection system <3PAR default system> OR <system_name>
IP: <PPPD.system.IP>
Router: <phone_number>
The SP local number is: <splocalnumber>
The dialup prefix is: <prefix>
Is this data correct? (yes or no)? [yes]
[enter]
Answering
no
here returns you to step 6.
NOTE:
The connection system IP and router number appear only when you are not using
the 3PAR Connection system.
21. Set up the time zone for the operating site:
a.
Select a country from the list, type the corresponding number, then press
ENTER
.
b.
Select a continent or ocean, type the corresponding number, then press
ENTER
.
c.
Select a country from the regional list, type the corresponding number, then press
ENTER.
d.
Select a time zone from the list, type the corresponding number, then press
ENTER.
22. Verify the time zone setting is correct, then type
1
and press
ENTER
. Choosing option
2
restarts
the time zone configuration.
NOTE:
The system makes the time zone change permanent. Disregard the instructions on
the screen for appending the command to make the time zone change permanent.
23. Press
ENTER
to accept the default date in brackets, or type the current date in
MM/DD/YYYY
format and press
ENTER
.
Basic Date and Time
Enter Control-C at any time to abort this process
Please enter the current date in MM/DD/YYYY format [<current date>] :
[enter]
54
Installing Storage Software Manually
