via SSH and HTTP.
Do you wish to configure the SP firewall in permissive mode? [yes/no][yes]
yes
37. Press
ENTER
or type
yes
and press
ENTER
to verify the network information you have supplied.
Some items appear only when applicable so the screen content may differ according to the
setup options you have chosen.
SP Network Parameters - Confirmation
Enter Control-C at any time to abort this process
The Host Name is: <spname>
- Domain name: Company Name or IP Address
- Public IP address: <static.IP.address>
- Netmask: <subnet.mask.address>
- Gateway: <default.gateway.address>
- Network Speed: AUTO
DNS system(s): <static.IPv4.address>
3PAR Secure Service Agent transport control selected.
PERMISSIVE FIREWALL MODE SELECTED
NTP system address: none
3PAR Secure Service Collector system
- Name/address: Production
- Proxy: none
3PAR Secure Service Policy Manager
- Name/address: <static.IP.address>
- Port: 8080
- Proxy: none
Is this data correct? (yes or no)? [yes]
yes
38. Answering
no
returns you to step 6.
NOTE:
The connection system IP and router number appear only when you are not using
the 3PAR Connection system.
39. Set the time zone for the operating site:
a.
Select a country from the list, type the corresponding number, then press
ENTER
.
b.
Select a continent or ocean, type the corresponding number, then press
ENTER
.
c.
Select a country from the regional list, type the corresponding number, then press
ENTER.
d.
Select a time zone region, type the corresponding number, then press
ENTER
.
40. Verify the time zone setting is correct, then type
1
and press
ENTER
. Choosing option
2
restarts
the time zone configuration.
NOTE:
The system automatically makes the time zone change permanent. Disregard the
instructions on the screen for appending the command to make the time zone change
permanent.
48
Installing Storage Software Manually
