9.
Press
ENTER
to accept the default gateway address, or type an alternate default gateway
address and press
ENTER
. The setup script suggests a default gateway address based on the
IP address you have supplied.
Please enter the IP address of a default gateway, or NONE [<static.IP.address.1>]:
<default.gateway.address>
10. Type
yes
and press
ENTER
.
Will this ethernet interface be used for inbound and/or
outbound files transfers (yes or no) [no]?
yes
11. Press
ENTER
or type
yes
and press
ENTER
.
SP Network Parameters
Enter Control-C at any time to abort this process
Will this SP be allowed to be remotely controlled (yes or no)? [yes]
(Replying 'yes' will allow Remote Operations sessions from a Connection
system)
[enter]
12. Type
m
and press
ENTER
.
SP Network Parameters
Enter Control-C at any time to abort this process
Which media will be used for Remote Operations ( ethernet or modem )?
Enter 'e' or 'm' [modem]:
[enter]
13. Type the phone number, including area code, for the SP and press
ENTER
.
SP Network Parameters
Enter Control-C at any time to abort this process
Please enter the SP’s local phone number, including area code, using only
the following characters: 0-9 ( ) - , Ex: (510)555-1212 011 813 55 12123:
<splocalnumber>
NOTE:
Any outside prefix is entered separately.
14. Type the prefix required when dialing out from the operating site, if any, and press
ENTER
.
SP Network Parameters
Enter Control-C at any time to abort this process
Please enter the required prefixes when dialing out.
- Just hit enter for no prefix
52
Installing Storage Software Manually
