HP 2530-24, Installation And Getting Started Manual

Page: 12 / 99

1-4
Introducing the Switch
These switches can be directly connected to computers, printers, and servers
to provide dedicated bandwidth to those devices, and you can build a switched
network infrastructure by connecting the switch to hubs, other switches, or
routers. In addition, these switches can be fully managed by HP SNMP-based
and browser-based network management tools.
Using HP SFPs, these products support optional network connectivity with
the following speeds and technologies:
Table 1-1. Optional Network Connectivity, Speeds and Technologies
Transceiver Form-
Factor and
Connector
1
Speed Technology Cabling SFP Connector
100 Mbps
100-FX Fiber (multimode) LC
100-BX Fiber (single mode) LC
1 Gbps
1000-T Copper (twisted-pair) RJ-45
1000-SX Fiber (multimode) LC
1000-LX Fiber (multimode or single mode) LC
1000-LH Fiber (single mode) LC
1000-BX Fiber (single mode) LC
1
For supported transceivers, visit www.hp.com/networking/support .
– In the first textbox, type J4858 (for 100-Mb and Gigabit information).
– Select any of the products that display in the dropdown list. Then click Display
selected .
– Select Product support information . Then click Manuals and find the Transceiver
Support Matrix .
For technical details of cabling and technologies see “Cabling and Technology Information
Specifications”
in the appendix A.