manualshive.com logo in svg

HP 1820, Management And Configuration Manual

Share
Download
HP 1820 Management And Configuration Manual Download Page 93

11-1

11

Diagnostics

You can use the Diagnostics pages to test, reboot, and view log and configuration information on the HP 1820 
series switch. 

Buffered Log

The log messages the switch generates in response to events, faults, errors, and configuration changes are stored 
locally on the switch in the RAM (cache). This collection of log files is called the RAM log or buffered log. 
When the buffered log file reaches the configured maximum size, the oldest message is deleted from the RAM 
when a new message is added. If the system restarts, all messages are cleared. The Log page displays the 100 
most recent system messages, such as configuration failures and user sessions. The newest log entry, by default, 
is displayed at the bottom of the list.

Note

If more than 100 messages accumulate, their Log Index numbers continue to increment beyond 100 and the 
oldest entries are deleted (for example, if 200 log entries were generated since the system was last restarted or 
the log file was cleared, then the log file would display entries 101 to 200).

To display the Log page, click 

Diagnostics

 > 

Log

 in the navigation pane.

Summary of Contents for 1820















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands