manualshive.com logo in svg

HP 1820, Management And Configuration Manual

Share
Download
HP 1820 Management And Configuration Manual Download Page 32

4-4

Switching Features

Port Configuration

Table 4-3. Port Summary Fields

Click 

Clear All Counters 

to reset all statistics to zero.

Field

Description

Interface

The port or trunk ID.

Received Packets w/o Error

The count of packets received on the port with out any packet errors.

Received Packets with Error

The count of packets received on the port with errors.

Broadcast Received Packets

The count of Broadcast packets received on the port.

Transmitted Packets w/o Error

The number of packets transmitted out of that port with out any packet errors.

Transmitted Packets with Error

The number of packets transmitted out of the port with packet errors.

Collisions

The number of packet collisions.

Transmitted Pause Frames 

The number of Ethernet pause frames transmitted. (This information is collected 

for ports but not for trunks.)

Received Pause Frames

The number of Ethernet pause frames received. (This information is collected 
for ports but not for trunks.)

Summary of Contents for 1820















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands