manualshive.com logo in svg

HP 1820, Management And Configuration Manual

Share
Download
HP 1820 Management And Configuration Manual Download Page 47

4-19

Switching Features

Loop Protection

Table 4-10.Loop Protection Configuration Global Fields 

Click 

Apply

 to update the switch configuration. Your changes take effect immediately.

Field

Description

Interface

The port or ports that are being configured.

Loop Protection

Select 

Enabled

 or 

Disabled

 to administratively enable or disable this feature on the selected 

interfaces. By default, this feature is disabled on all interfaces.
Note that loop protection can be enabled on static trunks, but cannot be enabled on trunks that 
are dynamically formed through LACP.

Action

Select the action to occur when a loop is detected on a port with loop protection enabled:
•

Shutdown Port

—The port will be shut down for the configured period. This is the default 

selection.

•

Shutdown Port and Log

—The event will be logged and the port it shut down for the 

configured period.

•

Log Only

—The event will be logged and the port remains operational.

Tx Mode

When set to 

Enabled

 (the default), the port actively sends out loop protection PDUs to other 

ports on which the loop protection feature is enabled. When set to 

Disabled

, the port does not 

send loop protection PDUs but can receive them from other ports. Tx Mode is enabled by default.

Summary of Contents for 1820















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands