manualshive.com logo in svg

HP 1820, Management And Configuration Manual

Share
Download
HP 1820 Management And Configuration Manual Download Page 63

7-5

Link Layer Discovery Protocol (LLDP and LLDP-MED)

LLDP Local Device Summary

Displaying Port Details

To view additional LLDP information that the interface advertises, select the interface and click 

Details

. 

Figure 7-3. LLDP Local Device Information Page

In addition to the fields described in Table 7-3 on page 7-4, this page displays the following fields.

Table 7-4. LLDP Local Device Information Fields

Field

Description

System Name

The user-configured system name for the device. The system name is configured on the 
Dashboard page.

System Description

The device description which includes information about the product model and platform.

Management Address

The address, such as an IP address, associated with the management interface of the device.

Management Address 

Type

The protocol type or standard associated with the management address.

System IP

The protocol type or standard associated with the management address.

Summary of Contents for 1820















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands