HP 175X - JetDirect Print Server Administrator'S Manual Download Page 169

Page: 169 / 302

ENWW

Configuring for LPD Printing 169

Configuring a Network Printer for
Windows NT 4.0 Systems

At the Windows NT 4.0 system, set up the default printer by
performing the following steps.

1. Click

Start

, select

Settings

, and click

Printers

. The

Printers

window opens.

2. Double-click

Add Printer

3. Select

My Computer

, then click

Next

4. Click

Add Port

5. Select

LPR Port

, and click

New Port

6. In the

Name or address of server providing lpd

box, type the IP

address or DNS name of the HP Jetdirect print server.

Note

NT clients can enter the IP address or name of the
NT server that is configured for LPD printing.

7. In the

Name of printer or print queue on that server

box, type (in

lowercase)

raw

text

binps

auto

, or the name of a

user-defined print queue (user-defined print queues can be set
up through the embedded Web server, see

Chapter 4

). Then

click

The HP Jetdirect print server treats

text

files as unformatted

text or ASCII files. Files that are

raw

are formatted files in PCL,

PostScript, or HP-GL/2 printer languages. If the queue type is

binps

, the PostScript interpreter is instructed to interpret the

print job as binary PostScript data.

Note

For a three-port HP Jetdirect external print server,
attach a port number to the queue name (for
example,

raw1

raw2

, or

raw3

8. Ensure that the port is selected in the

Add Printer

list of the

available ports, then click

Next

9. Follow the remaining instructions on the screen to complete the

configuration.

Summary of Contents for 175X - JetDirect Print Server















































































































































































































































































































Search results

Summary of Contents for 175X - JetDirect Print Server

Reviews:

HP 175X - JetDirect Print Server, Administrator'S Manual, Page: 169 / 302

Search results

Summary of Contents for 175X - JetDirect Print Server

Reviews: