manualshive.com logo in svg

HP 175X - JetDirect Print Server, Administrator'S Manual, Page: 127 / 302

Share
Download
HP 175X - JetDirect Print Server Administrator'S Manual Download Page 127

ENWW

Using the Embedded Web Server 127

Other Settings

This item provides access to a variety of management and printing 
configuration options. The following tabs are provided:

●

Misc. Settings

: for enabling miscellaneous advanced protocols 

and functions

●

Firmware Upgrade

: (for print servers that support firmware 

upgrades) to update your HP Jetdirect print server with new 
features and enhancements

●

LPD Queues

: for setting up print queues used in printing under 

LPD (line printer daemon) printing services

●

USB Settings

: (external print servers only) to configure 

Universal Serial Bus connection parameters

●

Support Info

: to set up the 

Support

 link located under 

Other 

Links

 in the left margin

●

Refresh Rate

: to set the time interval (in seconds) for embedded 

Web diagnostic page updates

Disable SNMPv1/v2 

This option disables the SNMP v1/v2c agents on the print 
server, which is recommended for secure environments. If 
SNMP v1/v2c is disabled, some port monitors or discovery 
utilities may not operate properly. 

Enable SNMPv3

(Full-featured HP Jetdirect print servers only) This option 
enables (check) or disables (clear) the SNMP v3 agent on 
the print server. 

When enabled, an SNMP v3 account must be created on 
the print server, and the account information must be 
implemented on the SNMP v3 management application. 
You may create an account by providing the following 
information:

User Name: the SNMP v3 account user name.

Authentication Key: a 16-byte hexadecimal value for 
authenticating the SNMP packet contents using the MD5 
algorithm. 

Privacy Key: a 16-byte hexadecimal value for encrypting 
the data portion of the SNMP packet using the DES 
algorithm.

Context Name: the view context in which this user can 
access SNMP objects. It is always “Jetdirect”.

Table 4.7

SNMP Settings (2 of 2)

Item

Description

Summary of Contents for 175X - JetDirect Print Server















































































































































































































































































































Reviews:

No comments