HoverCam Pilot 3, User Manual

Page: 9 / 23

8
Setting-Up
Tilt
Up/Down
Raise
Up/Down
Adjusting the Pilot
The Pilot
provides motorized he ight and tilt
adjustments to enable the optim um operating
position. The height and tilt
control
s are located on
the control
panel (located on the upper-right corner of
the podium surface). The podium can go from a
minimum height of
~
28
"
to a maximum height of
~
40
"
. The surface can tilt from 0º (flat) to 30º (tilted).
The Podium’s adjustability is compliant with the ADA
wheelchair accessibility standards.
Installing the Side Tray
For added convenience, the Pilot includes a
laptop tray that
at
tach
es the
side
of the podium . The tray is lar ge
enough to
accommodate most l
aptop
s
and
also functions as a cup
holder. It is l ocated in close proximity to the HDMI inputs for
quick access to the Pilot's input panel .
Before
tray
installation, make sure the Pilot
's top surface
is in
flat
position
. To install, simply guide the trey into the two
tray
support slots
on
the right
side of the Pilot, slide
the bar
to the
right until it locks in
to
place. Next, insert the
lower
support bar
into the support bar
slot
, and fasten it with the included
hardware.
Tray
Support
Tray
Support
Support Bar
Slot
Tray Support
Bar Slot