5
4 213 894 / 01
IMPORTANT INFORMATION
1.4
Regulations, official approvals
The following regulations are to be complied with for ins-
tallation and operation, in addition to the recognised rules
of the art:
Germany
•
DIN EN 12831 Heating systems in buildings - Methods
for calculating the design heat load
•
DIN EN 13384 Flue gas systems - Heat and flow calcu-
lation methods
•
DIN EN 12828 Heating systems in buildings - Planning
of hot water heating systems.
•
VDI 2035 Prevention of damage through corrosion and
scale formation in hot water heating systems.
• Firing regulation for the Federal regions
•
DVGW-TRGI 86-96
•
Technical regulations of gas supply enterprises
•
VDE 0100 for electrical installations and the TAB (tech-
nical connection conditions of the responsible energy
supplier)
•
ATV data sheet M251
•
Accident prevention regulations
-
VBG 1 General regulations
- VBG 4 Electric systems and equipment
Austria
•
OENORM 12831 Heating systems in buildings - Me-
thods for calculating the design heat load
•
OENORM 13384 Flue gas systems - Heat and flow cal-
culation methods
•
OENORM 12828 Heating systems in buildings - Plan-
ning of hot water heating systems.
•
OENORM H5152 Gas condensation for furnace instal-
lations
•
OENORM H5195-1 Prevention of damage through cor-
rosion
•
M 7443, (Part 2,3,7) Gas appliances with atmospheric
burners
•
M 7446, Heat output appliances for gaseous fuels
•
M 7457, Heat output appliances with mechanically sup-
ported premix bat-wing burners
•
M 7444, Special gas boilers with burners without fan
•
M 7459, Gas appliances with gas-air compound cont-
roller
•
ÖVGW TR- Gas
•
Technical provisions of the gas suppliers
Switzerland
•
SN EN 12831 Heating systems in buildings - Methods
for calculating the design heat load
•
SN EN 13384 Flue gas systems - Heat and flow calcu-
lation methods
•
SN EN 12828 Heating systems in buildings - Planning
of hot water heating systems.
•
Requirements of the VKF Cantonal Fire Insurance As-
sociation
•
Fire service regulations
•
SVGW directives, gas guiding standard G1
•
SNV271020 Aeration and ventilation of the boiler ins-
tallation room
•
SWKI 88-4 Water treatment for heating, steam and air
conditioning systems
•
SWKI 80-2 Technical safety regulations for heating sys-
tems
•
KRW Corrosion through halogen compounds
•
Procal/FKR Plug-in electrical connections on heating
boiler and burner
•
Technical tank regulations TTV 1990
•
EKAS - Guideline for liquid gas part 2
and further regulations and standards prescribed by the
CEN, CEN ELEC, DIN, VDE, DVGW, TRD and by law.
The regulations of the local building authorities, insu-
rance companies and chimney inspectors must also be
taken into account. The regulations of the responsible
gas supply company are also to be complied with and
any necessary official approval obtained if using gas.
Regulations governing the discharge and
treatment of condensate are subject to the
specifications of the local water authorities
and may deviate from waste water guideline
ATVM251. Please contact your water autho-
rity for details of the applicable local regula-
tions.
1.5
Transport and storage
Please remove the packing materials and examine the
consignment for correctness, completeness and possible
transport damage.
The appliance is only to be transported and stored only in
its original packing. Interim storage of Hoval gas boilers is
only to take place in weather protected rooms and only in
the original packing. The ambient conditions for storage
must be within the following limits:
- Air temperature: -10°C - +50°C
- Air humidity: 50 - 85% relative humidity
- no condensation
Summary of Contents for TopGas 80
Page 36: ...36 4 213 894 01 ...
Page 37: ...37 4 213 894 01 ...
