11
4 214 283 / 00
ASSEMBLY
2.4 Mounting
the
thermal
insulation
Max-3
pl
us
(1000-1250)
1.
W
rap the insulating mats (1/1a, Fig. 10) around the boiler body (joint at the side, black side outwards).
2.
Secure insulating mats (1/1a) with plastic straps (2) and strap fasteners (2a):
-
-
do not overtighten the straps (reduced insulating value)
3.
(The cleaning cover is replaced after mounting the cladding back wall (17, Fig. 13)
4.
Place insulating mat (4, Fig. 10) on the pins welded to the rear wall of the boiler and secure with the retaining discs (Fig
. 09).
5.
Place insulating mats (5/5a/5b/5c, Fig. 10) on the pins mounted to the front wall of the boiler and secure with the retainin
g discs (Fig. 09).
6.
The remaining insulating mats (7a/7b/15, Fig. 13) are put in place later on.
Before commencing to mount the cladding, check the dimension
between the top edge of the boiler plinth rail and the retaining rail.
Fig. 09
Max-3 plus (1000,1250) = 1391,5+3
0