manualshive.com logo in svg

hotset hotcontrol cDT+, Start-Up, Service And Operation Manual

Share
Download
hotset hotcontrol cDT+ Start-Up, Service And Operation Manual Download Page 54

52

Chapter 9

Input dialog zones

Rev. 1.00.05
Subject to technical changes

9.4.1 Edit group

Description

For data entry on the hot runner controller, the defined zone groups (maximum 32) can
be selected by the user for selection of zones.

How it works

Associated zones (e.g. nozzles in a special tool area, manifold zones) can comfortable
be combined in groups and saved with a freely specified name.

What good is it

The possibility of grouping of zones eases the operation and saves time. The groups
are saved with a freely specified name and can easily be recognized by the user.

Setting by

Zone selection keys [D] (page 50) in 

Input dialog zones (page 46)

There is no group (no group is
assigned to any zone) defined.

Press key

Select group (here: 01)

Summary of Contents for hotcontrol cDT+









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands