150
Chapter
MoldCheck
Rev. 1.00.05
Subject to technical changes
15.12MoldCheck
Description
MoldCheck is a complete diagnosis of electric conditions of the Hot Runner and the
corresponding peripherals.
How it works
The MoldCheck function is triggered by the user. Beside the full wiring control "Is no
thermocouple connected to the heating output?"a functional check of heaters and sen-
sors is run.
The function is ideal for tool makers and service departments, that have to guarantee
their customers and/or colleagues a 100% function of the electrical system of the hot
runner, as well as for the molders, who will control the status of the hot runner before
installation of the tool on the machine.
What good is it
Early enough analysis can reduce downtimes before production. Electrical control of
the hot runner controller is possible without specialized knowledge. The function pro-
vides concrete information for improvement and trouble shooting.
Setting by
[P028]MoldCheck max. wait time (page 191)
For further details on parameters ([P***], [SP**], [CP**]) see Manual Parameters
hot-
control cDT+
.
Text in zone display see chapter
Messages - Alarms, Status, Functions (page 73)
Whether and which keys are activated
for the user, see chapter
Select function
Press key
