Hotset GmbH
43
Start-up-, Service- and Operation Manual hotcontrol cDT+
Rev. 1.00.05
Subject to technical changes
8.7.1 Trend settings
Description
The graph in form of a trend is recorded for setpoint value, actual value and output val-
ue of each zone. In the trend up to 6 zones are displayed simultaneously to the user.
How it works
The data is recorded for all zones of the active Hot Runner Controller.
The data is stored in a circular buffer. This provides a data capacity for all zones of 20
minutes each. With filled circular buffer in data recording, the oldest data will be over-
written.
What good is it
The course of the values is recorded and can be analyzed easily.
Setting by
Whether and which keys are activated
for the user, see chapter
Show trend
In the basic state, the trend
curves are not displayed.
First zones must be selected
for display.
For zone selection choose zone field.
To get to
Input dialog zones (page 46), select drawing area of trend. Always the first
zone is shown as selected.
Select zones
