Hospira GemStar Manual 430-10984-001 (Rev. 03/06)
77
Chapter 5
Clinician Instructions
The instructions in this section apply to special features available to clinicians.
Remove this section from the manual to prevent unauthorized access to these
features.
The GemStar® Pump provides quick access to commonly used functions. Instead of
accessing these functions by navigating through the menu system, you can enter the
key combinations shown in this table:
Function
Quick Access Key Combination
Unlock Keypad
Place the pump in STOP mode and then enter the lock
sequence to unlock a Full Container or Rate Lock.
Displays Shift Totals
Place the pump in STOP mode and then press [
HELP
] to
display Shift Totals.
Display Clock
Place the pump in STOP mode, press [
YES
], and then press
and hold [
1
]. The clock displays until you release [
1
].
Program a Loading
Dose
From the Pain Management STOP MODE, press
[
YES/ENTER
], and then press [
0
] to program a Loading
Dose.
430-10984-001.book Page 77 Friday, March 31, 2006 4:49 PM
